Instructions

Car Burst Instructions

Wondering how to use your product?

Diffusers

The diffuser is really easy to use, please follow these steps:

  1. Fill diffuser with about 60% - 80% with water
  2. Add 2-3 drops of fragrance to the water
  3. Close the lid, plug into USB port with the cable supplied
  4. Press once for continuous, press again for 3 second burst (allow a minute or two for the water to soak up and diffuse)
  5. Press and hold for white light, press and hold again for multi-colour dynamic light

If you are still having trouble getting your diffuser to work then please contact us on social media or via email info@car-burst.co.uk.

 

Precautions

  • Please use clean tap water or mineral water and it is not recommended to use distilled water to affect the humidification effect.
  • Do not use whilst driving and make sure the light is not distracting you at night.
  • Make sure the water container is only loaded with no more than 90%.
  • Be careful not to touch or deform metal atomizer of the top. Or the function will be influenced.
  • Be careful with the connection port on the top of the diffuser as this can be fragile.
  • If spray becomes smaller or no spray this may be because the tank is empty, please fill with water.
  • If spray has odor: please determine the water quality, change the water and replace the cotton swab. It is advised to change water each day.
  • If not mixed or diluted properly the fragrance oils can start to react with the plastic. Please be careful not to add too much fragrance.

Wireless Car Diffuser

The wireless car diffuser is really easy to use, please follow these steps:

  1. Fill the 4ml glass bottles with the wireless diffuser compatible fragrances.
  2. Remove the magnetic lid from the diffuser and remove the lid from the glass bottle.
  3. Screw the glass bottle securely into the diffuser lid.
  4. Place the magnetic diffuser lid back in the diffuser with the attached filled bottle.
  5. Press button once for Mode 1 (Purple LED ) 5s Spray 600s Pause. Press button again for Mode 2 (Blue LED) 5s Spray 300s Pause.

If you are still having trouble getting your diffuser to work then please contact us on social media or via email info@car-burst.co.uk.

Precautions

  • Please ensure you only use the wireless diffuser compatible fragrances. These oils are less viscous. Any standard oils will not work with this product.
  • If spray becomes smaller or no spray this may be because the tank is empty, please fill refill with compatible fragrance.
  • If not mixed or diluted properly the mist may stop.

Clip Diffusers

The clip diffuser is really easy to use, please follow these steps:

  1. Diffuser will be pre-filled with fragrance so all you need to do is add this clip to your car vent.
  2. Twist the cap with the dots to open and close the vent. When the largest dot is aligned at the middle the vent will be open.
  3. You can add more fragrance using the 10ml refills. Just add 3-5 drops (1/10th of 10ml refill) of fragrance to the internal cotton diffuser.

Scent n' Vac

To use Scent n' Vac please follow these steps:

  1. Sprinkle the powders on carpets, rugs, car floor mats, upholstery, mattresses, ashtrays, mop buckets and more.
  2. Allow the powder to settle for as long as possible but our minimum recommendation is 15 mins to 1 hour.
  3. Remove the powder by vacuuming the treated areas. The longer you leave it the more fragrance will be released.

Keep up to date with Car Burst and get access to exclusive offers by following us on social media.